About Us

Group shot of all workers at Lie-Nielsen

Our Mission is to design and create beautiful, heirloom quality, hand tools that inspire woodworkers and other artisans. Through exceptional support and education, our customers receive the same personal attention we put into our tools.

Quality

Our first priority is quality. Instead of out-sourcing all our jobs for the cheapest price and short-term profit, we are stubbornly local and believe the best quality is right here in New England. We source our metal castings from New England foundries, our wood from Maine sawyers, and use a combination of modern CNC technology, Bridgeport milling machines, and good old-fashioned hand work to make nearly 100 different types of tools in our mid-coast Maine shop.

Education and Support

Many of our customers are new to hand tool woodworking or want to take their skills to the next level. Our expanding line of instructional DVDs and YouTube videos, produced in-house, explore a wide range of hand tool woodworking topics and feature many of today’s master woodworkers . 

We also offer a variety of Weekend Workshops each summer, held in our classroom in Maine and taught by expert woodworkers . Our showroom and shop are open to the public year-round for tours and demonstrations. 

Our traveling Hand Tool Events® give you the chance to try our full line of tools and learn techniques directly from our staff. These events are unique in the philosophy behind them and the experiences at each one. Each year, we visit over 40 schools, guilds, woodshops, and businesses across North America and set up a full Lie-Nielsen shop for two days. We invite other hand toolmakers to join us and demonstrate their own tools at each Event, giving visitors exposure to many lesserknown fine tools on the market. There is no charge to attend. Our focus is to promote woodworking education, hands-on skill building, and a spirit of collaboration.

Grinding and Polishing a PlaneHistory

LIE-NIELSEN TOOLWORKS began in 1981 as an effort to make top-quality hand tools available again from a U.S. maker and to revive discontinued, but useful, designs so the average woodworker could obtain them.

Today we make over 100 types of planes, saws, spokeshaves, chisels, floats and more. We have improved and refined designs, and use better materials like Ductile Iron and Manganese Bronze for castings and cryogenically treated A-2 Tool Steel for the blades. Our plane blades are much thicker than those of any other production planes. The quality of machining and finishing results in a tool that looks as great as it works, and will be a pleasure to use for years to come.

We are proud to continue the tradition of “Made in America.” Instead of out-sourcing all our jobs for the cheapest price and short term profit, we are stubbornly local. We have found that the best quality is right here in Maine. We source our metal castings from New England foundries, our wood from Maine sawyers, and make almost everything else the old-fashioned way at our shop in Warren.



About Our Tools

Many of our hand planes derive from discontinued Stanley designs, refined to meet higher quality standards. Our blades are thicker and harder, our castings are thicker, flatter, and more resilient, our parts fit more precisely, our surfaces ground more accurately, and we put careful hand work into the final fit and finish of each tool.

We make our tools from high-grade materials, many of which had previously been too expensive, not yet fully developed, or unavailable in suitable tool-making quality

Ductile Iron

We were the first plane makers to start making our tools from Ductile Iron, which is far stronger and more resilient than traditional Gray Iron. Ductile Iron bodies absorb vibrations, are highly resistant to cracking, and will survive an accidental fall to the workshop floor that would break a Gray Iron casting. In our tests with the 60 ½ Rabbet Block Plane, a 15' drop onto concrete, nose first, bent the tool a trifle, but did not break the casting.

Manganese Bronze

Though Cast Iron has long been the material of choice for mass-produced tools, we use Manganese Bronze for many of our components and smaller plane bodies. It is heavier than Iron and adds heft to the tool, doesn’t rust, won’t crack if dropped, and has wonderful warmth in the hand. It is one of the hardest, strongest Bronze alloys and wears very well, unlike Brass and softer Bronzes.

Stress Relieved Castings

Stress relieving metal castings is an essential part of making quality hand planes. When metal is cast, particularly in a long flat shape like a bench plane, internal stresses must be relieved to ensure the machined casting will stay flat over time. We stress relieve all our castings by soaking them at high temperature with a slow cooling over 48 hours.

Blade Steel

The blade is the most important part of a hand tool. Our blades are thicker than other manufacturers’ for a solid cut with minimal vibration. We use A2 tool steel for most of our blades because our tests have shown that the edge lasts significantly longer than O1 tool steel, and sharpens readily with waterstones. Blades are hardened to Rockwell 60-62, cryogenically treated and double tempered for an even finer grain and enhanced durability.

Some folks are used to working with O1-type steel and like the way it sharpens with oilstones, so we offer O1 blades for many of our planes as well.

Wood Handles & Knobs

We use sustainably-grown, native hardwoods for our handles and knobs: Cherry, Curly Maple, Hickory, and Maine-grown Hornbeam. We carefully shape our plane and saw handles by machine and by hand to ensure a comfortable grip, finish them with wiping varnish, oil, or wax, and hand-buff them to a silky smooth surface.

Quality & Workmanship

Our first priority is quality. Instead of out-sourcing our jobs for the cheapest price and short-term profit, we are stubbornly local and believe the best quality is right here in New England. We source our metal castings from New England foundries, our wood from Maine sawyers, and use a combination of modern CNC technology, Bridgeport milling machines, and good old-fashioned hand work to make nearly 100 different types of tools in our mid-coast Maine shop