Violin Maker's Plane
Our Violin Maker's Block Plane is perfect for detail-oriented jobs like instrument building or model making. Loosely based on the Stanely No. 101, it is the smallest of our hand planes to feature a captive nut blade adjuster for precisely controlled depth of cut. Body and cap are Manganese Bronze for extra weight, durability, and resistance to rust.
- The body is 3-7/16" long x 1-3/16" wide x 1-5/8" tall.
- Blade is 7/8" side x 1/8" thick A2 Steel, bedded at 18º.
- Weight is .50 lbs.
Violin Maker's Block Plane
This pocket-sized block plane is the smallest of our hand planes to feature a captive nut blade adjuster for precisely controlled depth of cut. Loosely based on the Stanley No.101 block plane, the Lie-Nielsen Violin Maker’s Plane features several significant improvements that put it in a class of its own. The body and cap are made from Manganese Bronze for extra weight, durability, and resistance to rust. The blade is made from 1/8" thick cryogenically treated A-2 steel for chatter-free cuts and prolonged edge life. The addition of a finely controlled blade depth adjuster make this little workhorse perfect for detail-oriented jobs like instrument building or model making.
The blade comes with a 25° flat ground bevel. It is bedded in the plane at 18°, giving you a cutting angle of 43°. The mouth of the plane is made to take a maximum .008-.010" cut, which is suitable for most woodworking.
The blade comes ready to use. Slight additional honing will increase performance. A secondary bevel of up to 5° helps achieve a razor edge quickly. For more information on advanced sharpening, we suggest David Charlesworth’s DVD Hand Tool Techniques Part 1: Plane Sharpening.
Slightly loosen the pressure of the cap and advance or retract the blade. Tighten the spinwheel. Do not overtighten. You should be able to adjust the blade after loosening the spinwheel about a quarter turn.
We use Manganese Bronze for the body of this plane. Our castings are fully stress-relieved, a process that removes inherent stresses and ensures that the tool will remain flat and true. The cap is also Manganese Bronze; other parts are Brass and Stainless Steel. The blade is A-2 Tool Steel hardened to Rockwell 60-62, cryogenically treated and double tempered. Our heat-treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very quickly. The 1/8" thickness provides solid, chatter-free cutting.
The Bronze body is lapped flat. Depending on how much you use your tool, an occasional light sanding with 400 or finer wet/dry paper on a flat surface will keep the sole in as-new condition. A light oiling on the threaded rod, adjuster nut and spinwheel will keep them moving freely. We recommend Camellia or Jojoba Oil, which are natural, non-toxic, odor-free, vegetable-based products that are very easy to use. Many people like the patina that Bronze gets with age and use, but if you wish to keep the finish bright, a little brass polish is in order.
Materials and workmanship are guaranteed for the life of your tool. Call for repairs or replacement parts. We are available for advice if you ever have a problem using your tool.
Proposition 65 Notice:
Bronze and brass alloys contain lead, a chemical known to the State of California to cause cancer and birth defects, or other reproductive harm. Wash hands after handling.