Lie-Nielsen Replacement Blades


Our A-2 Tool Steel is cryogenically treated, hardened to Rockwell 60-62 and double tempered. Our heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very quickly. Our blades are thick to provide solid, chatter-free cutting.

Skew Block Plane Blade, Righhand
Product ID : 1-BL-140
Small Bronze Spokeshave Blade
Product ID : 1-BL-SBS
Small Chisel Plane Blade
Product ID : 1-BL-971-2
Small Router Plane Blade
Product ID : 1-BL-271
Small Router Plane Blade, 1/4" Pointed
Product ID : 1-BL-271-1-4-P
Small Router Plane Blade, 3/32" Pointed
Product ID : 1-BL-271-3-32-P
Small Router Plane Blade, 3/32" Square
Product ID : 1-BL-271-3-32-S
Small Scraping Plane Blade
Product ID : 1-BL-212
Small Scraping Plane Blade, Toothed-18tpi
Product ID : 1-BL-212-18tpi
Small Scraping Plane Blade, Toothed-25tpi
Product ID : 1-BL-212-25tpi
Small Shoulder Plane Blade
Product ID : 1-BL-041
Violin Maker's Plane Blade
Product ID : 1-BL-101
Violin Maker's Plane Blade, Toothed
Product ID : 1-BL-101T
Untitled Document

Some folks however prefer O-1 Tool Steel, because O-1 holds up better at lower angles, 25 degrees or less, making them more useful for slicing or paring tasks. We offer O-1 blades for Adjustable Mouth Block Plane, Iron Miter Plane, Low Angle Jack Plane, Low Angle Jointer, Low Angle Smoothing Plane, No. 102 or 103 Block Plane, No. 2 Bench Plane, No. 4 or 5 Bench Plane, and No. 4 1/2, 5 1/2, 6 or 7 Bench Plane.