Low Angle Jack Rabbet Plane

Price: $245.00
Product ID : 1-610

Purchase

E-mail to a friend | Add To Wish List

Details

A Lie-Nielsen original, this plane is a cross between our Bench Rabbet Plane (but without the tilting knob and handle) and our Low Angle Jack Plane, giving you a full-width cutting blade in a convenient, low-angle format.

Great for raising panels, making long rabbets, working into corners, and large-scale joinery.
  • 12-3/4" long x 2-1/8" wide.
  • Full-width, 3/16" thick A2 blade and cross-grain nickers.
  • The blade is bedded at 12 degrees.
  • Weight is 3.65 lbs (1.655 kg).

Use

Tool Care

Materials:

The body is cast from Ductile Iron, a very strong alloy that will take a lot of abuse. These castings are fully stress-relieved, a process that removes inherent stresses and ensures that the tool will remain flat and true. The cap is Manganese Bronze. Other parts are Brass, Steel and Cherry.

The blade is 3/16" A-2 cryogenically treated Tool Steel, double tempered to Rockwell 60-62. Our heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very quickly. The thick blade provides solid chatter-free cutting.

Maintenance:

The sole is ground flat to .0015" or less. Occasional hand lapping with fine wet/dry sandpaper (320 grit or higher) on a flat surface like a glass plate, will help remove dings and keep it true. The cap iron can be polished with any good brass polish, or allowed to patina with age and use. Occasionally, the tool should be disassembled, cleaned, and moving parts oiled. The blade should be kept lightly oiled to prevent rust, especially when the tool is not in use. We recommend Camellia or Jojoba oil - vegetable oil based products. They are non-toxic, odor-free and easy to use. Also, in our shop, we use a fine abrasive handblock to remove any light surface oxide from tool bodies and blades. Camellia & Jojoba oils and abrasive handblocks are available from us.

Guarantee:

Materials and workmanship are guaranteed for the life of your tool. Call for repairs or replacement parts. We are available for advice if you ever have a problem using your tool.

Proposition 65 Notice:

Bronze and brass alloys contain lead, a chemical known to the State of California to cause cancer and birth defects, or other reproductive harm. Wash hands after handling.