• Boggs Spokeshaves
  • Curved Bottom Spokeshave

  • Flat Bottom Spokeshave

Boggs Spokeshaves

Price: $135.00
Product ID : 1-SP-Boggs

Purchase

E-mail to a friend | Add To Wish List

Details

The original Boggs Spokeshave is hefty and solid, weighing 12 oz. Designed for fine, precise shaping in all woods. Available with either a flat or curved sole.

  • Body is 10" long with a 1" wide flat sole.
  • The sole of the Curved Spokeshave has a gentle, 5" radius for working inside curves.
  • 2" x 1/8" thick A2 blade.
  • Bronze body and cap.
  • Hickory handles
  • Weight is 12 oz.

Concave Boggs Shave

A collaboration between Master Chair Maker Brian Boggs and Lie-Nielsen Toolworks. A 2 5/8" diameter sole makes the Boggs Concave Spokeshave the right choice for working chair spindles and other round parts.

  • Body is 9-5/8" long.
  • A2 blade is 1-1/8" x 1/8" thick.
  • Bronze body and cap.
  • Hickory handles.
  • Weight is 8 oz.

Flat/Curved Use & Care

Flat & Curved Boggs Spokeshave

This tool is set up to take thin shavings (maximum .008-.010" or so). A tool with a large mouth will not perform as well on finish cuts. If you need a heavier cut, the tool can be easily modified by filing a chamfer on the leading edge of the mouth to allow a bigger shaving to pass.

Geometry:

The blade has a 25° bevel and is bedded at 40° to the sole, bevel down.

Blade Sharpening:

The blade comes ready to use. Slight additional honing will increase performance. A secondary bevel of up to 5 degrees helps achieve a razor edge quickly. This also improves edge life in hardwoods. For more information on advanced sharpening we suggest David Charlesworth’s DVD Hand Tool Techniques Part 1: Plane Sharpening.

Blade Adjustment:

The easiest way to adjust the depth of cut is to lay the sole on a flat wood surface, loosen the cap and advance the blade until it touches the wood evenly. Tighten the cap screw. This should produce a thin shaving. If not, or if more cut is desired, either repeat with a paper shim under the front edge of the sole, or tap the back of the blade gently with a small hammer.

Curved Sole:

The approximately 5" radius on the curved sole is intended for inside curves. The sole can be modified by the user for tighter radii.

If you have any concern that the curved spokeshave you received has a flat sole instead of a curved sole, please check the sole with the edge of a straight edge. The radius on the sole of the Boggs Curved Spokeshave is approximately 5". A gentle radius like this works very well for curves as small as 10" in diameter.

If you need to work a radius smaller than 5", please consider our Small Bronze Spokeshave, which has a 1 ½" radius.

Materials:

Manganese Bronze body and cap, Brass thumbscrew. Heartwood Hickory handles. The blade is A-2 Tool Steel hardened to Rockwell 60-62, cryogenically treated and double tempered. Our heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very quickly.

Maintenance:

Polish the Bronze parts with any good brass polish or enjoy the patina that develops with age and use. Oil the blade to prevent rust. We recommend Camellia or Jojoba Oil - vegetable oil based products. They are non-toxic, odor-free and easy to use.

Guarantee:

Materials and workmanship are guaranteed for the life of your tool. Call for repairs or replacement parts. We are available for advice if you ever have a problem using your tool.

Proposition 65 Notice:

Bronze and brass alloys contain lead, a chemical known to the State of California to cause cancer and birth defects, or other reproductive harm. Wash hands after handling.

Concave Use & Care

Concave Boggs Spokeshave

A 2 5/8" diameter sole makes this tool the right choice for working chair spindles and other round parts.

Geometry:

The blade has a 25° bevel and is bedded at 40° to the sole, bevel down. This tool is set up to take thin shavings (maximum .008-.010" or so). A tool with a large mouth will not perform as well on finish cuts. If you need a heavier cut, the tool can be easily modified by filing a chamfer on the leading edge of the mouth to allow a bigger shaving to pass.

Blade Sharpening:

Use the spokeshave to work a 1½" piece of wood to a radius that matches the blade when the blade is held at 25º to its surface (the angle of the bevel). Glue sandpaper or microfilm to the wood and use to hone the blade. Make several pieces for different grits. Use with diamond paste or honing compounds for the best edge. Hone the back of the blade as usual.

Setting depth of cut:

Set the blade by eye; sight down the sole and look for the dark line of the projecting blade. Make adjustments with a small hammer. The corners of the blade are meant to be flush with the sole when the blade is set to take a thickish shaving.

Materials:

Manganese Bronze body and cap, Brass thumbscrew. Heartwood Hickory handles.

The blade is A-2 Tool Steel hardened to Rockwell 60-62, cryogenically treated and double tempered. Our heat-treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat-treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very quickly.

Maintenance:

Polish the bronze parts with any good brass polish or enjoy the patina that develops with age and use. Oil the blade to prevent rust. We recommend Camellia or Jojoba Oil - vegetable oil based products. They are non-toxic, odor-free and easy to use.

Guarantee:

Materials and workmanship are guaranteed for the life of your tool. Call for repairs or replacement parts. We are available for advice if you ever have a problem using your tool.

Proposition 65 Notice:

Bronze and brass alloys contain lead, a chemical known to the State of California to cause cancer and birth defects, or other reproductive harm. Wash hands after handling.