Gooseneck Scrapers are used on contoured surfaces. This set includes four scrapers: one large and one small scraper, each in two thicknesses, .020" and .032" Polished Swedish Spring Steel.
The thinner blade (.020") is quite flexible, and is great for scraping shorter, complex surfaces. The thicker blade (.032") will take a heavier cut, and is best for larger surfaces.
Burnishing: Before you use the scraper, it is helpful, but not absolutely necessary, to turn a burr on the edges. Use of a burr will give more aggressive cutting action. When burnishing a Gooseneck Scraper, you may need to use a round or curved face file to get into tight radii.
To create a burr, hold the scraper upright in a vise. Use a burnisher and begin by holding the burnisher at 90° to the blade, decreasing the angle with successive passes. Work the edge until you can feel a distinct ‘hook’ all the way across. Be very careful not to cut yourself on the upright scraper.
Materials: The Lie-Nielsen Hand Scrapers are made from premium, high carbon Swedish Tool Steel hardened and tempered to Rockwell 49-51. They will take a burr well and last a long time. The long sides have been ground square. If you wish to use the short sides, file square before burnishing.
Maintenance: The scrapers are made of Steel and will rust. Keep them lightly oiled and wrapped in cloth or treated paper when storing the scrapers between uses. We recommend Camellia or Jojoba Oil - vegetable oil based products. They are non-toxic, odor-free and easy to use. Also, in our shop, we use a fine abrasive handblock to remove any light surface oxide from tool bodies and blades. The oils and the abrasive handblock are available from us.
Guarantee: Materials and workmanship are guaranteed for the life of your tool. Call for repairs or replacement parts. We are available for advice if you ever have a problem using your tool.